Gas Compressor

Shopping on line can be easy, simple and save you lots of money. It can also take a lot of your time, frustrate you, and result in unwanted purchases. Now the same can be said for regular high street shopping, but with the vast opportunity presented by the Internet it will pay you to spend a few minutes reading this and understanding how to better optimize your Gas Compressor shopping experience:

1. Compare - without doubt the biggest advantage that the Gas Compressor offers shoppers today is the ability to compare thousands of Gas Compressor at a time. This is a great thing, but not necessarily all the time! Too much can be daunting at times so take advantage of the great comparison sites and where possible let them do the hard work for you.

2. Research - if it has been said it will be on the internet. Ignorance is no longer a justifiable reason for buying the wrong thing. Take the time to research in detail everything that you could possible want to know about

3. Testimonials - don't know anybody that has bought a Gas Compressor? Wrong! If the Gas Compressor is good the internet will let you know. Use the Internet as a friend and get testimonials before you buy.

4. Questions - Got a question about Gas Compressor then search the Forums, FAQ's, Blogs etc. Don't be afraid to ask .....

5. Reputation - Never heard of the company selling Gas Compressor? Don't worry, no reason why you should know every company in the world, but you know someone that does! Use the internet to find out what people are saying about Gas Compressor and build up a picture of their reputation for sales, returns, customer service, delivery etc.

6. Returns - still worried that even after all of the above your Gas Compressor wont be what you want? Check out the returns policy. There is so much competition now that someone, somewhere is bound to offer the terms that you are comfortable with.

7. Feedback - happy with your Gas Compressor then let people know, after all you are depending on others people input in your buying decision, so why not give a little back.

8. Security - check for the yellow padlock on the Gas Compressor site before you buy, and the s after http:/ /i.e. https:// = a secure site

9. Contact - got a question about Gas Compressor, or want to leave a comment then check out the sites contact page. Reputable companies have them and respond.

10. Payment - ready to pay for your Gas Compressor, then use your credit card or PayPal! Be aware of companies that don't accept them, there may be genuine reasons but given the huge amount of choice you have when buying online there is no reason at all not to buy via credit card or PayPal.

A gas compressor is a mechanical device that increases the pressure of a gas by reducing its volume. Compression of a gas naturally increases its temperature.

Compressors are similar to pumps: both increase the pressure on a fluid and both can transport the fluid through a pipe (material). As gases are compressible, the compressor also reduces the volume of a gas. Liquids are relatively incompressible, so the main action of a pump is to transport liquids.

Types of compressors The main types of gas compressors are illustrated and discussed below:

Centrifugal compressors

Centrifugal compressors use a vaned rotating disk or impeller in a shaped housing to force the gas to the rim of the impeller, increasing the velocity of the gas. A diffuser (divergent duct) section converts the velocity energy to pressure energy. They are primarily used for continuous, stationary service in industries such as oil refinery, chemical plant and petrochemical plants and natural gas processing plants. Their application can be from 100 hp (75 kW) to thousands of horsepower. With multiple staging, they can achieve extremely high output pressures greater than 10,000 psi (69 MPa).

Many large snow-making operations (like ski resorts) use this type of compressor. They are also used in internal combustion engines as superchargers and turbochargers. Centrifugal compressors are used in small gas turbine engines or as the final compression stage of medium sized gas turbines.

Diagonal or mixed-flow compressors Diagonal or mixed-flow compressors are similar to centrifugal compressors, but have a radial and axial velocity component at the exit from the rotor. The diffuser is often used to turn diagonal flow to the axial direction. The diagonal compressor has a lower diameter diffuser than the equivalent centrifugal compressor.

Axial-flow compressors Axial-flow compressors use a series of fan-like rotating Rotor (turbine) blades to progressively compress the gasflow. Stationary Axial compressor # Description vanes, located downstream of each rotor, redirect the flow onto the next set of rotor blades. The area of the gas passage diminishes through the compressor to maintain a roughly constant axial Mach number. Axial-flow compressors are normally used in high flow applications, such as medium to large gas turbine engines. They are almost always multi-staged. Beyond about 4:1 design pressure ratio, variable geometry is often used to improve operation.

Reciprocating compressors

Reciprocating compressors use pistons driven by a crankshaft. They can be either stationary or portable, can be single or multi-staged, and can be driven by electric motors or internal combustion engines. Small reciprocating compressors from 5 to 30 horsepower (hp) are commonly seen in automotive applications and are typically for intermittent duty. Larger reciprocating compressors up to 1000 hp are still commonly found in large industrial applications, but their numbers are declining as they are replaced by various other types of compressors. Discharge pressures can range from low pressure to very high pressure (>5000 psi or 35 MPa). In certain applications, such as air compression, multi-stage double-acting compressors are said to be the most efficient compressors available, and are typically larger, noisier, and more costly than comparable rotary units. Introduction to Industrial Compressed Air Systems

Rotary screw compressors

Rotary screw compressors use two meshed rotating positive-displacement Helix to force the gas into a smaller space. These are usually used for continuous operation in commercial and industrial applications and may be either stationary or portable. Their application can be from 3 hp (2.24 kW) to over 500 hp (375 kW) and from low pressure to very high pressure (>1200 psi or 8.3 MPa). They are commonly seen with roadside repair crews powering air-tools. This type is also used for many automobile engine superchargers because it is easily matched to the induction capacity of a piston engine.

Scroll compressors

A scroll compressor, also known as scroll pump and scroll vacuum pump, uses two interleaved spiral-like vanes to pump or Gas compressor fluids such as liquids and gases. The vane geometry may be involute, archimedean spiral, or hybrid curves. They operate more smoothly, quietly, and reliably than other types of compressors.

Often, one of the scrolls is fixed, while the other orbits eccentrically without rotating, thereby trapping and pumping or compressing pockets of fluid between the scrolls.

Diaphragm compressors A diaphragm compressor (also known as a membrane compressor) is a variant of the conventional reciprocating compressor. The compression of gas occurs by the movement of a flexible membrane, instead of an intake element. The back and forth movement of the membrane is driven by a rod and a crankshaft mechanism. Only the membrane and the compressor box come in touch with the gas being compressed.

Diaphragm compressors are used for hydrogen and compressed natural gas (Compressed natural gas) as well as in a number of other applications.

The photograph included in this section depicts a three-stage diaphragm compressor used to compress hydrogen gas to 6,000 psi (41 MPa) for use in a prototype hydrogen and compressed natural gas (CNG) fueling station built in downtown Phoenix, Arizona by the Arizona Public Service company (an electric utilities company). Reciprocating compressors were used to compress the natural gas.

The prototype alternative fueling station was built in compliance with all of the prevailing safety, environmental and building codes in Phoenix to demonstrate that such fueling stations could be built in urban areas.

Temperature Charles's law says "when a gas is compressed, temperature is raised". There are three possible relationships between temperature and pressure in a volume of gas undergoing compression:

Isothermal process - gas remains at constant temperature throughout the process. In this cycle, internal energy is removed from the system as heat at the same rate that it is added by the mechanical work of compression. Isothermal compression or expansion is favored by a large heat exchanging surface, a small gas volume, or a long time scale (i.e., a small power level). With practical devices, isothermal compression is usually not attainable. For example, even a bicycle tire-pump gets hot during use.
Adiabatic process - In this process there is no heat transfer to or from the system, and all supplied work is added to the internal energy of the gas, resulting in increases of temperature and pressure. Theoretical temperature rise is T2 = T1·Rc((k-1)/k)), with T1 and T2 in degrees Rankine scale or kelvins, and k = ratio of specific heats (approximately 1.4 for air). The rise in air and temperature ratio means compression does not follow a simple pressure to volume ratio. This is less efficient, but quick. Adiabatic compression or expansion is favored by good insulation, a large gas volume, or a short time scale (i.e., a high power level). In practice there will always be a certain amount of heat flow, as to make a perfect adiabatic system would require perfect heat insulation of all parts of a machine.
Polytropic process - This assumes that heat may enter or leave the system, and that input shaft work can appear as both increased pressure (usually useful work) and increased temperature above adiabatic (usually losses due to cycle efficiency). Cycle efficiency is then the ratio of temperature rise at theoretical 100 percent (adiabatic) vs. actual (polytropic).

Staged compression Since compression generates heat, the compressed gas is to be cooled between stages making the compression less adiabatic and more isothermal. The inter-stage coolers cause condensation meaning water separators with drain valves are present. The compressor flywheel may drive a cooling fan.

For instance in a typical diving compressor, the air is compressed in three stages. If each stage has a compression ratio of 7 to 1, the compressor can output 343 times atmospheric pressure (7 x 7 x 7 = 343 Atmospheres).

Prime movers There are many options for the "prime mover" or motor which powers the compressor:

gas turbines power the axial and centrifugal flow compressors that are part of jet engines
steam turbines or water turbines are possible for large compressors
electric motors are cheap and quiet for static compressors. Small motors suitable for domestic electrical supplies use single phase alternating current. Larger motors can only be used where an industrial electrical three phase alternating current supply is available.
diesel engines or petrol engines are suitable for portable compressors and support compressors used as superchargers from their own crankshaft power. They use exhaust gas energy to power turbochargers

Applications Gas compressors are used in various applications where either higher pressures or lower volumes of gas are needed:

in pipeline transport of purified natural gas to move the gas from the production site to the consumer.
in petroleum refineries, natural gas processing plants, petrochemical and chemical plants, and similar large industrial plants for compressing intermediate and end product gases.
in refrigeration and air conditioner equipment to move heat from one place to another in refrigerant cycles: see Vapor-compression refrigeration.
in gas turbine systems to compress the intake combustion air
in storing purified or manufactured gases in a small volume, high pressure cylinders for medical, welding and other uses.
in many various industrial, manufacturing and building processes to power all types of pneumatic tools.
as a medium for transferring energy, such as to power pneumatic equipment.
in Cabin pressurization aircraft to provide a breathable atmosphere of higher than ambient pressure.
in some types of jet engines (such as turbojets and turbofans) to provide the air required for combustion of the engine fuel. The power to drive the combustion air compressor comes from the jet's own turbines.
in SCUBA diving, hyperbaric oxygen therapy and other life support devices to store breathing gas in a small volume such as in diving cylinders.
in submarines, to store air for later use in displacing water from buoyancy chambers, for adjustment of depth.
in turbochargers and superchargers to increase the performance of internal combustion engines by increasing mass flow.
in Rail transport and heavy road transport to provide compressed air for operation of Air brake (rail) or Air brake (road vehicle) and various other systems (doors, windscreen wipers, engine/gearbox control, etc).
in miscellaneous uses such as providing compressed air for filling pneumatic tires.

See also

Cabin pressurization
Centrifugal fan
Compressed air
Gas compression heat pump
Fire piston
Hydrogen compressor
Liquid ring
Roots blower (a lobe-type compressor
Pneumatic cylinder
Pneumatic tube
Pressurization
Vapor-compression refrigeration

References

A gas compressor is a mechanical device that increases the pressure of a gas by reducing its volume. Compression of a gas naturally increases its temperature.

Compressors are similar to pumps: both increase the pressure on a fluid and both can transport the fluid through a pipe (material). As gases are compressible, the compressor also reduces the volume of a gas. Liquids are relatively incompressible, so the main action of a pump is to transport liquids.

Types of compressors The main types of gas compressors are illustrated and discussed below:

Centrifugal compressors

Centrifugal compressors use a vaned rotating disk or impeller in a shaped housing to force the gas to the rim of the impeller, increasing the velocity of the gas. A diffuser (divergent duct) section converts the velocity energy to pressure energy. They are primarily used for continuous, stationary service in industries such as oil refinery, chemical plant and petrochemical plants and natural gas processing plants. Their application can be from 100 hp (75 kW) to thousands of horsepower. With multiple staging, they can achieve extremely high output pressures greater than 10,000 psi (69 MPa).

Many large snow-making operations (like ski resorts) use this type of compressor. They are also used in internal combustion engines as superchargers and turbochargers. Centrifugal compressors are used in small gas turbine engines or as the final compression stage of medium sized gas turbines.

Diagonal or mixed-flow compressors Diagonal or mixed-flow compressors are similar to centrifugal compressors, but have a radial and axial velocity component at the exit from the rotor. The diffuser is often used to turn diagonal flow to the axial direction. The diagonal compressor has a lower diameter diffuser than the equivalent centrifugal compressor.

Axial-flow compressors Axial-flow compressors use a series of fan-like rotating Rotor (turbine) blades to progressively compress the gasflow. Stationary Axial compressor # Description vanes, located downstream of each rotor, redirect the flow onto the next set of rotor blades. The area of the gas passage diminishes through the compressor to maintain a roughly constant axial Mach number. Axial-flow compressors are normally used in high flow applications, such as medium to large gas turbine engines. They are almost always multi-staged. Beyond about 4:1 design pressure ratio, variable geometry is often used to improve operation.

Reciprocating compressors

Reciprocating compressors use pistons driven by a crankshaft. They can be either stationary or portable, can be single or multi-staged, and can be driven by electric motors or internal combustion engines. Small reciprocating compressors from 5 to 30 horsepower (hp) are commonly seen in automotive applications and are typically for intermittent duty. Larger reciprocating compressors up to 1000 hp are still commonly found in large industrial applications, but their numbers are declining as they are replaced by various other types of compressors. Discharge pressures can range from low pressure to very high pressure (>5000 psi or 35 MPa). In certain applications, such as air compression, multi-stage double-acting compressors are said to be the most efficient compressors available, and are typically larger, noisier, and more costly than comparable rotary units. Introduction to Industrial Compressed Air Systems

Rotary screw compressors

Rotary screw compressors use two meshed rotating positive-displacement Helix to force the gas into a smaller space. These are usually used for continuous operation in commercial and industrial applications and may be either stationary or portable. Their application can be from 3 hp (2.24 kW) to over 500 hp (375 kW) and from low pressure to very high pressure (>1200 psi or 8.3 MPa). They are commonly seen with roadside repair crews powering air-tools. This type is also used for many automobile engine superchargers because it is easily matched to the induction capacity of a piston engine.

Scroll compressors

A scroll compressor, also known as scroll pump and scroll vacuum pump, uses two interleaved spiral-like vanes to pump or Gas compressor fluids such as liquids and gases. The vane geometry may be involute, archimedean spiral, or hybrid curves. They operate more smoothly, quietly, and reliably than other types of compressors.

Often, one of the scrolls is fixed, while the other orbits eccentrically without rotating, thereby trapping and pumping or compressing pockets of fluid between the scrolls.

Diaphragm compressors A diaphragm compressor (also known as a membrane compressor) is a variant of the conventional reciprocating compressor. The compression of gas occurs by the movement of a flexible membrane, instead of an intake element. The back and forth movement of the membrane is driven by a rod and a crankshaft mechanism. Only the membrane and the compressor box come in touch with the gas being compressed.

Diaphragm compressors are used for hydrogen and compressed natural gas (Compressed natural gas) as well as in a number of other applications.

The photograph included in this section depicts a three-stage diaphragm compressor used to compress hydrogen gas to 6,000 psi (41 MPa) for use in a prototype hydrogen and compressed natural gas (CNG) fueling station built in downtown Phoenix, Arizona by the Arizona Public Service company (an electric utilities company). Reciprocating compressors were used to compress the natural gas.

The prototype alternative fueling station was built in compliance with all of the prevailing safety, environmental and building codes in Phoenix to demonstrate that such fueling stations could be built in urban areas.

Temperature Charles's law says "when a gas is compressed, temperature is raised". There are three possible relationships between temperature and pressure in a volume of gas undergoing compression:

Isothermal process - gas remains at constant temperature throughout the process. In this cycle, internal energy is removed from the system as heat at the same rate that it is added by the mechanical work of compression. Isothermal compression or expansion is favored by a large heat exchanging surface, a small gas volume, or a long time scale (i.e., a small power level). With practical devices, isothermal compression is usually not attainable. For example, even a bicycle tire-pump gets hot during use.
Adiabatic process - In this process there is no heat transfer to or from the system, and all supplied work is added to the internal energy of the gas, resulting in increases of temperature and pressure. Theoretical temperature rise is T2 = T1·Rc((k-1)/k)), with T1 and T2 in degrees Rankine scale or kelvins, and k = ratio of specific heats (approximately 1.4 for air). The rise in air and temperature ratio means compression does not follow a simple pressure to volume ratio. This is less efficient, but quick. Adiabatic compression or expansion is favored by good insulation, a large gas volume, or a short time scale (i.e., a high power level). In practice there will always be a certain amount of heat flow, as to make a perfect adiabatic system would require perfect heat insulation of all parts of a machine.
Polytropic process - This assumes that heat may enter or leave the system, and that input shaft work can appear as both increased pressure (usually useful work) and increased temperature above adiabatic (usually losses due to cycle efficiency). Cycle efficiency is then the ratio of temperature rise at theoretical 100 percent (adiabatic) vs. actual (polytropic).

gas turbines power the axial and centrifugal flow compressors that are part of jet engines
steam turbines or water turbines are possible for large compressors
electric motors are cheap and quiet for static compressors. Small motors suitable for domestic electrical supplies use single phase alternating current. Larger motors can only be used where an industrial electrical three phase alternating current supply is available.
diesel engines or petrol engines are suitable for portable compressors and support compressors used as superchargers from their own crankshaft power. They use exhaust gas energy to power turbochargers

Applications Gas compressors are used in various applications where either higher pressures or lower volumes of gas are needed:

in pipeline transport of purified natural gas to move the gas from the production site to the consumer.
in petroleum refineries, natural gas processing plants, petrochemical and chemical plants, and similar large industrial plants for compressing intermediate and end product gases.
in refrigeration and air conditioner equipment to move heat from one place to another in refrigerant cycles: see Vapor-compression refrigeration.
in gas turbine systems to compress the intake combustion air
in storing purified or manufactured gases in a small volume, high pressure cylinders for medical, welding and other uses.
in many various industrial, manufacturing and building processes to power all types of pneumatic tools.
as a medium for transferring energy, such as to power pneumatic equipment.
in Cabin pressurization aircraft to provide a breathable atmosphere of higher than ambient pressure.
in some types of jet engines (such as turbojets and turbofans) to provide the air required for combustion of the engine fuel. The power to drive the combustion air compressor comes from the jet's own turbines.
in SCUBA diving, hyperbaric oxygen therapy and other life support devices to store breathing gas in a small volume such as in diving cylinders.
in submarines, to store air for later use in displacing water from buoyancy chambers, for adjustment of depth.
in turbochargers and superchargers to increase the performance of internal combustion engines by increasing mass flow.
in Rail transport and heavy road transport to provide compressed air for operation of Air brake (rail) or Air brake (road vehicle) and various other systems (doors, windscreen wipers, engine/gearbox control, etc).
in miscellaneous uses such as providing compressed air for filling pneumatic tires.